JF-801 Bimetallic bearings, is low-carbon steel as the base material, the surface of the sintered steel or copper alloy ...
JF-802 Bimetallic bearings, is based on steel substrate surface of the sintered material CuPb30 products ...
JF-830 Bimetallic bearings, is based on steel substrate CuPb24Sn4 surface of the sintered alloy products. The product has ...
JF-804 High Tin Aluminum Bearing,the surface roll AISn20Cu material products. The product has medium fatigue strength and ...
JF-805 lead-free bimetallic bearings is a kind of environmentally friendly bimetallic bearings, it is a low carbon steel plate as the substrate ...
JF-08G Bimetallic Bearings,FB08G solid lubricating bearings, JF800 dual-metal material is a matrix, a special solid lubricant embedded ...
SF-1 Self-Lubricated Bearing,acid resistant,alkali resistant and seawater resistant,more over,there is no lead in the PTFE ...
SF-1Gear Pump Bearing is specialy designed for gear pumps. It is made on the basis of SF-1, suits for working condition of high PV value ...
SF-1S Stainless steel bearings, stainless steel is the matrix, the middle sintered corrosion-resistant alloy powder ...
SF-1B Bronze Bushing is made of bronze base, sinter with bronze powder and PTFE layer with filling material of anti-high temperature ...
SF-1W is a new type lead free bushing which is developed for the aim of increasing demands on environmental protection ...
SF-1P is Particularly suitable for bushes in reciprocating motion,and the properties are similar to DD2 type product in foreign country ...
SF-2 Boundary lubrication bearing steel is for substrate, middle sintering spherical bronze powder ...
SF-2Y Boundary lead-free bearing is improved on the basis of SF-2. Its performance with SF-2 are the same ...
SF-2S Non-oil lubricated bearings, SF-2 is an improved product, with copper back as the substrate ...
SF-2L Lead free lubrication bearing is improved from SF-2. It has low friction coefficient ...
SF-2P(PEEK) Three-layer composite bearings, is a novel sliding bearing, which consists of steel, copper powder, PEEK + filler ...
FB090 bronze bearings, specially formulated high-density copper alloy strip base body surface may be requested by the ...
FB091 Brass Wrapped Bushing as the matrix material is brass, surface rolling diamond, from the oil storage effect ...
FB092 bronze bushing is based on bronze material body, uniform and orderly filling hole by rolling a thin wall bearing ...
FB094 Bronze Bearing are wrapped from a cold formed homogenous bronze(CuSn8P) with exceptional material properties ...
FB09G solid lubricating bearings bronze, in bronze material substrate surface made of solid lubricants embedded ...
JDB-1 Solid Self-Lubricating Inlaid Bearing, at high force brass substrate. Mosaic graphite or MoS2 solid lubricant ....
JDB-2 is made of bronze CuSn6Zn6Pb3 with graphite evenly embedded in it. It can work under low load ...
JDB-3 is made of two kinds of material, steel back sintered with CuSn6Zn6Pb3 powder as a Lining ...
Finishing copper alloy bushings provide a simple, economical way to use bearings with high bearing ...
JDB-5 is made of casting iron HT250 and embedded with solid lubricant. It is a typical cost saving product ...
Our long-term undertaking all kinds of non-standard customized products to meet our customers use requirements
READ MOREJIASHAN VOKE AUTO PARTS CO., LTD.
Add: No. 102, Yaoxing Road, Ganyao,
Jiashan, Zhejiang, China
Tel: 0086-0573-84686067
Tel: 18358349989
Fax: 0573-84615338
Website: www.gamburg.net
E-mail: info@zjvoke.com